SPECIFIC CERAAMICS LIMITED  
  Home  
 
About Us Products Products Info Career Enquiry Contact
To be a leader in Construction industry by Manufacturing high quality Vitrified Tiles with Innovative designs concepts.  
To create a large satisfied customer base by delivering durable, defect free, environment friendly and properly designed products with excellent services at a reasonable and affordable price.  
To encourage our employees who are our first assets, by promoting and utilizing their best knowledge and experience.  
SPECIFIC CERAAMICS LIMITED Recognizes the need to product research and other modern marketing tools as vital parts of the company progress.  
 
 
 
Products Info
Technical Specification | Laying Instruction
 DURATO 300x300 mm Tile Fixing Instructions
 
01.
Plaster the surface of the floor to be tiled a wood tiles finish and complete the rendering and curing at least two weeks prior tilling DO NOT FIX TILES ON RESH FLOOR.
02.
Before fixing the tiles, lay them out in the desired pattern and make sure that they give an acceptable blend of colours and Design. Also make sure that the tiles are acceptable to your satisfaction. Please note that certain amount of shade & size variation is inherent in all ceramic product. THE COMPANY WILL BEAR NO LIABILITY AFTER THE TILES ARE FIXED.
03.
The company bears no responsibility towards the tiles exposed to any outside process like transfers, printing, firing etc.
04.
For fixing floor tiles, we recommend the use of tiles fixing adhesives, for best results, following the fixing instructions provided along with the adhesives.
05.
For fixing floor tiles, using sand and cement, follow the instructions given below:
a)
Use cement and sand mortar in the ratio of 1:3 add some water to create a consistent paste. DO NOT USE NEAT CEMENT FOR FIXING TILES.
b)
Once the mixing has been completed, do not add any further water and use the same within one hour.
c)
Soak the tiles in clean water for at least 30 minutes before fixing
d)
Remove the tiles from the water and allow them to drain to ensure  that three is no film of water on the surface.
e)
Apply the bedding material evenly and tap if firmly back into position to ensure proper content between the tile and floor.
06.
The work size which we try to maintain for better technical performance is 300x300 on average. It is advisable to maintain a gap of 1 mm to 2/3mm between every two tiles to allow for possible expansion as per BIS/EN tolerance norms.
07.
Wait for 24 hours after fixing the tiles. After this period, fill the joints with adhesive grout.
08.
Fifteen minutes after the grouting process, wipe off the excess grout with a damp sponge.
09.
Please note; The company does not accept any liability in case of problems arising out of non-adherence to these fixing instructions.
10.
Please note that tiles are especially manufactured for use on the floor only. DO NOT FIX FLOOR TILES ON THE WALL.
11.
For cleaning tiles, use water of dilute soap solution followed by water with soft, moist cloth or sponge. DO NOT SCRUB OF SCRATCH.
NOTHING IN THESE INSTRUCTION IS A SUBSTITUTE FOR GOOD WORKMANSHIP AND SUPERVISION
 
 
 
 DURATO 605x605 mm Tile Fixing Instructions
 
01.
 Plaster the surface of the floor where the tiles will be laid with smooth finish and complete the plastering and curing at least two weeks prior to laying.
02.
 Before fixing DURATO tiles, lay them out in the desired pattern and make sure that they give an acceptable blend of colour. Please note that certain amount of shade variation is inherent in the manufacture of a fully vitrified ceramic tiles. THE COMPANY WILL BEAR NO LIABILITY AFTER THE TILES ARE FIXED.
03.
 The company bears no responsibility towards the tiles exposed to any outside process like transfers, printing, firing etc.
04.
 For fixing DURATO, we recommend the use of  tile fixing adhesives for best results. Also follow the fixing instructions provided along with the adhesives.
05.
 For fixing DURATO tiles on the floor, using sand and cement, follow the instructions given below:
a) Use cement and sand mortar in the ratio of 1:4. Add some water to create a consistent paste.
b) Once the mixing has completed do not add any further water and use the same within one hour.
c) Apply a 20-30 mm, layer of bedding material over an area of 1 square meter at a time on the surface of the area. Apply a fine slurry to the back of the tile to ensure proper and full bedding. Press gently for even adherence at the back of the tile. DO NOT USE AN IRON HAMMER OR SOME HEAVY MATERIAL TO PRESS THE TILE.
06.
 For fixing DURATO tiles on Dado, we recommend the use of  tile fixing adhesive  with proper troweling method for 100 per cent coverage behind the tiles and for peerless bonding. Please follow the manufacturer's instructions for the same. We do not recommend the use of sand and cement for fixing on Dado.
07.
 Make and lay out the tiles from the center of the area to be laid so that cut tiles, if any, will be on the outer edges towards the walls.
08.
 The work size which we try to maintain for better technical performance is 605 mm x 605 mm (605 mm x 605 mm for selected product) on average. It is advisable to maintain a gap of 1 mm to 2 mm between every two tiles to allow for possible expansion as per BIS/EN tolerance norms.
09.
 Complete the laying process by pressing the cut DURATO tiles firmly into place along the walls/floors.
10.
 Allow 3-4 days for bed curing. After this period fill the joints with grouts. Usage of grout sealant is recommended for keeping the grout free of dust.
11.
 Fifteen minutes after finishing the grouting process, wipe off excess grout with a damp sponge and polish the tiles with a soft and dry cloth for a clean surface. The tiles can also be cleaned with a mild acid (However, Hydrofluoric acid and its derivatives should not be used).
12. Please note that the company does not accept any liability in case of problems arising out of non-adherence to these fixing instructions.